Cock

Custom Sapele Wood Wavy Cock Ring

What do you do when you trawl about the Internet looking to add to your collection and fail to find anything new that especially grabs your attention? Why… have a custom adornment made! The inspiration hit me while I was wandering the random cock rings on Etsy. Funny enough, Etsy doesn’t care to comprehend the difference between a penis ring and a finger ring, often sprinkling in sponsored advertisements and “you might like” links within the search results for a cock ring. In this case, I saw a finger ring style that I had never seen before. While most purveyors of tungsten carbide rings cannot customize their offerings, I’ve had great luck with sellers on Etsy who make wooden rings being willing to make a custom piece for a bit of a larger part of the body. So, with that, I reached out to the seller and Maksym helped make it happen.

Continue reading

Manadorned Full Crystal Pave

Yes, I’m always looking for something new to add to the collection - and given that I’ve learned how to make my own adornments from interesting materials like aluminum, it was only a matter of time before I stumbled on a new great idea. I don’t know what took so long for this design, but it finally dawned on me one day that I’ve always been a fan of mixed material adornments (such as wood/metal, aluminum/rubber, etc) and it really wouldn’t be all that hard to design a mixed material ring of my own! I have a few adornments with gems on them, but I thought it would be super interesting to revisit the ill-fated crystal pave experiment from a long while back. Surely I could make my own ring that was dashing and comfortable!

Continue reading

ManAdorned Smooth Aluminum

I couldn’t just make ONE new design while the creative juices were flowing, could I? Of course not! Joining the knurled aluminum design is this new sleek, smooth, and crisp cock ring. Most of my designs have an inset field with a pattern inside but I decided to go a different direction on this one after having such great feedback from the pillowed segments design.

While I love the weight of a stainless ring, this one called for a bright polish that is best achieved with aluminum to really make the design as dapper and sharp as possible. Although stainless polishes well, it’s a naturally darker metal than aluminum. For an adornment that is intended to look elegant under a pair of dress slacks, only the brighter aluminum would do. It came out great, of course, but I do have the worry that the smooth aluminum finish will accept scratches and nicks a little too easily.

Continue reading

ManAdorned Knurled Aluminum

Well it’s been a while since I decided to design my own adornment again… and this fine example is quite a wonderful outcome! Given that I have been successful producing geometric designs with various inlays/patterns, a question dawned on me. Why in the world don’t I have a cock ring that has a classic knurled finish to it?!? Now I do! I figured the design would come out well given that several others have been cool, but I’m actually quite surprised by how handsome this one turned out!

Continue reading

Kink3D 3D Printed Countour Ring

KD over at KINK3D reached out to share some exciting news. They are expanding their line of high quality 3D printed chastity adornments to include a new cock ring - and asked if I would like a review sample to share thoughts and opinions. Of course, I’m always excited to try something new, so quickly jumped at the opportunity! When the ring arrived, I immediately put it on and wore it for two days straight to get a clear feeling for fit and performance. Call me a fan!

Continue reading

Hard Man Outfitters Dome Splitter

Remember when I mentioned that I saw a split domed ring from Hard Man Outfitters in their newsletter… but couldn’t find it? Well… I found it! I’m not sure what is up with HMO’s website and their search results, but finding products from search engines on their site is always hit or miss!

I would recommend reading the previous review for impressions of this style of adornment. Cliff’s Notes: I’m a fan! I love how they look and how they wear. They’re also subtly shaped in a way that you could go stealth mode and wear them all day long. For this particular specimen, it differs from the 3d printed model I created in two key ways: it’s polished (gorgeous) and the wire is thinner. The inner diameter is only about .002mm off of the ordered size coming in at 1.755". The steel wire is .230" thick and it all comes together to weigh 1.81oz. Made in stainless, I was curious how the weld attaching the two wires would come out. As can be seen in the picture, there was generous filler material applied to avoid the corners being tight/sharp to pinch our sensitive bits. As usual, this is a thoughtfully designed adornment from HMO! Also, as you can see on their website, ordering in a 40mm size will get you an adornment that works quite well on the scrotum as a ball separator giving a little more visual bling for those that enjoy testicle weights.

Continue reading

Hard Man Outfitters C-Splint Penis Tube

Hard Man Outfitters, known for their cool designs, released this cock splint a while ago. I thought it was neat at the time I saw it, but didn’t jump at the addition. As a subscriber to their newsletter, it popped in as a sale item (or some other discount) and it reminded me that I should give it a whirl!

This splint has an interesting design. Built from aluminum and coated with a hammered gray metallic finish, it is much lighter than it appears. The full length of the splint at the bottom is just shy of 4 inches at 3.95" with a ball opening of 1.4" x 1.76". This opening has rounded edges at the corners to prevent unneeded discomfort. The splint transitions to a shaft ring gradually right around the center of the ball opening. Think of this like a triple ring cock cage that doesn’t have an opening for the cock and balls to go through. The shaft opening for the medium size is 1.365" with a hefty band at about .035" thick. The width of the shaft ring is right at 1" and features a gem embedded into the splint at the top for a bit of added flare. All edges of the splint are rounded, as you would expect, to keep sharp edges from digging in to our oh-so-sensitive flesh.

Continue reading

Primal:Power Flex Cock Ring in Satin Black Silicone

One of the best things happened the other day: a random note shared on r/CockRingTalk by user u/Nudenotrude327 saying, without being a corporate shill, “Hey, guys - this Primal Power silicone ring is pretty sweet. You should check it out.” I knew exactly what to do next: get one!

It was an easy call to pick up another Primal adornment because the Primal Energy is one of my favorites. Like the Energy, the Power features a tapered contour from top to bottom as well as a slight curve toward the body as the it tapers. Departing from that initial design that put Primal on the map, this adornment is significantly thicker in width as well as being made of a silky soft black silicone material. The “P” embossed logo at the top of the ring may be a divisive decision (I’m all for brands… but while it’s on, MY brand is what should be front and center)… but that is up to you to decide. The generous proportions of the adornment ensure maximum comfort. With more than .3" in height and .7" of width, the overall thickness helps prevent pinching by helping limit the amount of skin that can “roll” over the ring and get caught between your body and clothes. I also find that wider designs “present” nicer by lifting the testicles forward. Bonus points! So, immediately upon receiving it, I geared up. Barring a few unavoidable pinches caused by my thick jeans, I was quite pleased with the comfort of the ring.

Continue reading

ManAdorned Aluminum Net Triple Ring

OK… so in a previous review, I may have said that I cannot decide if I like the hex pattern or the net pattern better for my own custom-designed adornment. I think I’ve settled on the net pattern being preferred - and to drive the point home, I decided to build a crowning achievement in my absolute favorite adornment style: a gorgeous triple ring of this current favorite design!

The design itself just a fusion of the standard ring (review, a newly designed shaft ring and a newly designed ball ring. I had each ring manufactured standalone, and they all are wonderful as they are (which makes sense - they perfectly fit my preferred style and size).

Continue reading

3D Printed Split Ring

Having signed up for the hard man outfitters newsletter/insider club, I received an e-blast about some upcoming new products. One of them was a new ring called a split dome (or something similar). I had seen this kind of ring before, but forgot all about them until the newsletter popped in. It got me thinking about the style again. Being oddly shaped compared to the other adornments in my collection, I was wondering if I would even like the fit at all when a thought occurred to me: The design is simple enough that I could model and print one to find out!

Continue reading