This interesting adornment features larger stainless steel balls soldered together to form a firm ring. The design is interesting and the size of the individual stainless beads reduces the pressure one would expect to feel from such a design. All in all, a decent addition to the collection.
Given that Blue Collar Fetish Wear uses quality materials at reasonable prices and great designs, I found myself back at their Etsy shop when I realized I hadn’t picked up a new adornment for the collection in a while.
This five snap cock strap is made of supple, soft leather allowing for lots of adjustment. Although the quality and stitchwork is exceptional, one has to deal with the luck of the draw when it comes to the pattern. In my case, I got a mostly navy blue ring with only a few small spots of different colored camouflage. Kind of a bummer, but still a great adornment for the collection.
Conceptually, this adornment’s design should be neat and unique. It is a silicone ring with two stainless steel half rings embedded inside. This should give the benefits of flexible silicone and the rigidity and constriction of stainless.
Unfortunately, it all falls apart rather quickly. While the size is close to my preferred goldilocks size for a shaft ring, the inner profile of the ring is as thin as a typical wire ring. This creates pressure points right on the shaft where the ring sits that is no different than using a standard wire ring. The body of this adornment is tapered, though, but I feel as though the manufacturer tapered it in the wrong direction. It makes a lot more sense to have the wider portion of the ring directly against the shaft rather than the other way around.
Another great design by Ballistic Metal. The Raptor features a gear-like design along the outside of its brushed stainless finish. As is common with other Ballistic Metal designs, this adornment is on the larger size in height and width which helps with comfort.
The machining on the ring is excellent, as is par for the course, but the inner profile is not as radiused as I would typically ask for… though it is well rounded to ensure comfort. The outer edges are also rounded to minimize pinches and trouble while wearing tight or stiff pants.
Hard Man Outfitters has some unique shaft rings available in much thicker size than you may be used to. These thicker rings offer the boon of a reduced pressure point when erect and a bit more visual interest thanks to the wider ring.
These are easily some of the best shaft rings available - I have a few for swapping into other adornments such as a strap/shaft combo and also keep an available 8mm and 10mm size depending on how the mood strikes me.
As a maker and owner if a 3D Printer, I had the idea to browse the web for ring models that could be scaled to adornment size. I was relatively successful in finding this particular model. After a quick bit of calculation and sizing, the perfect scaling parameters were available and the custom shaft ring ready to print.
I think the results turned out quite nice and this shade of silver provides a handsome accent at the base of a hard on. The only thing I would change for this particular attempt were to use a resin printer for much higher resolution on the print, which would result in a smoother finished product.
Schmuckcockring makes some really cool custom cock shields. These adornments, of course, surround your cock like any other ring would, but also extends above and below. This adds lots of visual interest by really drawing attention to your member but also serves the added benefit of reducing pinching of no mans land while seated.
This sample form Schmuckcockring is an excellent example of the craftsmanship that goes into the rings. I am not sure what it takes to make a stainless ring, but this one shows no casting marks, manufacturing abrasions, or waviness along the body and ring.
This unique adornment is 3D printed from a wood material and finished with a body safe sealant. The design is striking with twisting spokes along the circumference and the curious material to 3d print makes it an obvious buy.
The ring is comfortable to wear despite the spokes which would make one think they pinch and the darker color of the wood is very handsome.
After finding Josielynn’s shop on Shapeways and trying out a slightly custom design, I was so pleased that I had to try out a fully customized design. Like my favorite Chaste Bird Cage, this design allows for a nearly full erection, but still tightly trapped penis.
The design features cage bars that run the length of the shaft with additional bars along the glans and “no touch” panels at the top and bottom. The 1.375" chosen inner diameter of the cage (my preferred diameter for shaft rings) ensures that the shaft is almost at full girth but still constrained and the 1.75" curved base cock ring provides outflow constriction to keep everything nice and hard while excited. The modular design of Josielynn’s Cherry Keeper series allows for swapping out base rings for other sizes or uncurved rings.
While browsing Ebay for stuff I could repurpose to wrap around ny junk, this attractive bracelet stood out as a likely contender. Made of faux leather and accented with silver jewelry bands, all it took to repurpose was a razor knife, tape measure, gorilla glue, and knowledge if the size I wanted.
As I’ve noted in many reviews before, I love cock and shaft combos so this pair of repurposed bracelets created a nicely matching set. As a single or paired adornment, the custom sizing provides for a very nice erection enhancement.
Copyright (c) 2022, ManAdorned; all rights reserved.
